Interim, in-process and final rust inhibitors designed to protect metal parts during the manufacturing process and for medium to long-term indoor storage of metal surfaces, both ferrous and non-ferrous.
Frequently Asked Questions:
These questions and answers are to inform you in an easy to read manner, not to confuse you with technical calculations.
Please contact us if you need specifics on any of these.
一．I am having a rusting problem, what do I need to do?
Flash rust generally happens when there is not enough lubricoolant in the mixture. Recheck your dilution ratio.
If all of these steps have been tried and you still have an issue, you may be using the wrong lubricoolant for the specific job at hand, please contact us.
二．What are some methods to use in preventing aluminum (machined product) discolorations (stains)?
The four general methods are shown below.
1. Use the cutting fluid with the suitable concentration (20x to 30x).
2. The mixing of other oils in the tank is an easy way to generate stains on the products, so remove other oils from the tank.
3. After machining, wash or air blow the products to remove any oil that has adhered to them.
4. Use a cutting fluid that has excellent compatibility with aluminum.