die casting lubricants
● Product Application
Our unit research to process WGN-A1304 die-casting Stripping agent as ordinary type made from various oil fat with separation
emulsion agent to make additive by itself and has good lubrication and stripping mould effect.
● Product Feature
1. Good lubrication and separation type for stripping mould with deep cavity and long core projection area and large area casing mould advantage.
2. non-stack form mould evenly with casting surface clean and glossy after spraying .
3. The mould and casting cake have no chemical reaction.
4. Changeable use volume doesn't affect product quality and stripping effect.
5. Convenient to use its right of use and spraying depended on the condition of plant and is used for automation of spraying.
6. It is non-harmful gas, pollution for environment, harmful human health and reaches standard of the state greatly passing determination of South China Environment Research Station.
● Instruction For Use
When dilution for it, put stripping agent in container and then fill in with tap water in times as stirring to be even emulsion liquid for casting temperature and can be spraying (spraying on mould cavity with spraying gun) or brushing (use hair brushing brushes on mould) mould temperature at 180c 300C best and spraying more times if exceeding this temperature Dilution proportion refers to 1: 80 -100 values. Please you dilute the liquid times for cast simple depended on the data provided by our company and cast size and hard or difficulty to decide
suitable dilution for normal cast large, thin and complicated. You must try the pressure to obtain best data to decide how suitable
dilution time is. The product is prohibited to mix with other stripping agent (separation type) and acid alkaline substance to affect its quality.
20 L/bucket, 20 kg/bucket, 25L/bucket, 25 kg/bucket
Keep it in indoor warehouse, dry and shady and cool place with tight seal for half year.