Home > RLT Lab > Content
Remember, A Good Industrial Gear Oils Is Not Necessarily A High Quality Industrial Gear Oils
Sep 12, 2017

Remember, a good Industrial Gear Oils is not necessarily a high quality Industrial Gear Oils

At present, there are many metal processing manufacturers that have such an idea, the lubrication performance good Industrial Gear Oils is high quality Industrial Gear Oils. In fact, this is a very one-sided view. Today, dongguan Industrial Gear Oils is to explain to you why the lubricated Industrial Gear Oils is not necessarily the high quality Industrial Gear Oils.
Good lubricity Industrial Gear Oils is high quality Industrial Gear Oils, this is a problem widely misunderstood, some people always think that improve the quality of the Industrial Gear Oils or quality grade is to constantly improve the Industrial Gear Oils extreme pressure, lubricity, and attempt to use Industrial Gear Oils lubricity to differentiate the quality levels of the Industrial Gear Oils. As stated earlier, the performance requirements of Industrial Gear Oils are multifaceted, and the properties that should be met are determined according to the actual needs of the application. Lubrication performance just metal many feature of Industrial Gear Oils is not lubrication, the higher the better, excessive lubrication tend to take effect instead of the negative effect, such as chemical wear, because of the extreme pressure sex too can greatly shorten the tool life, the application of extreme pressure agent promotes rust and cause serious corrosion, because of lubricity additives and workpiece surface adsorption film (especially chemical film) to the post-processing and application of artifacts, such as atomic energy industry and electronic industry with some of the metal parts) in trouble.
In addition to its processing properties, Industrial Gear Oils is also an important factor for metal processing manufacturers. Why often have metal processing manufacturers, said they currently use Industrial Gear Oils products, there will be a stink, service life is not long, and from the Internet in search of our Industrial Gear Oils consulting? The Industrial Gear Oils that we produce in dongguan has some special place, why the service life is longer than the domestic general Industrial Gear Oils. The reasons mainly include the following three aspects:
First, we use the raw materials used in metal Industrial Gear Oils, most of which are imported from abroad. In particular, fungicides are usually added with good quality fungicides, which can effectively improve the deterioration of Industrial Gear Oils.
Second, the difference of production process, our Industrial Gear Oils products, is to use a separate dedicated production lines, avoid mixed with other materials in the production process of problem, avoid because of the outside world for bacteria to enter Industrial Gear Oils.
Third, to buy our Industrial Gear Oils products customers, we will provide professional advice and technical after-sales service. Before using the new Industrial Gear Oils, it is important to make sure that the oil tank and the related management are sterilized and clean, and the best possible way is to avoid the bacteria entering into the metal Industrial Gear Oils.
Yellow rust on the surface of machine tool can affect the service life of machine tool and not beautiful. Metal processing liquid manufacturers teach you to use Industrial Gear Oils to remove rust on the surface of the machine.
Machine tool after a period of time use, if be brushed not very clean normally, the place that is oily oily on machine tool will hang a layer of yellow rust, affect machine surface clean and beautiful.
To erase these yellow rust, can use first not melt is heavy Industrial Gear Oils painting in the machine tool's yellow rust on the surface, after a moment, then use cotton yarn with hot water, open of Industrial Gear Oils wipe, yellow rust can be erased.
Industrial Gear Oils is a high performance semi-synthetic metal processing fluid specially suitable for processing aluminum and alloys, but it is not suitable for lead-based materials, such as some brass and tin metals.

Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Rolitone
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Products
  • RLT Lab
  • Knowledge
  • Contact Us
  • Feedback
  • Case
  • Catalog
  • Copyright © Rolitone technology Co.,Ltd. All Rights Reserved.